This is my favorite post workout smoothie. It’s the one I make after the gym when I want something cold, creamy, and genuinely good — not a chalky shake I’m drinking out of obligation. It takes about 3 minutes to put together, it uses ingredients I usually have on hand, and it tastes like a berry milkshake that happens to be good for after a workout.
The smoothie is built on almond milk, a banana, a scoop of creatine, and frozen mixed berries. That’s it. The banana is what makes it creamy — frozen works, but a room-temperature banana blends faster and gives the smoothie a softer texture. The frozen berries are what make it cold and thick, and they add the tartness that balances the sweetness of the banana. The almond milk is the base that brings it all together.
The technique that makes this smoothie work is the layering order. Almond milk goes in first so the blades spin freely, then the banana and creatine, then the frozen berries on top so their weight presses everything down into the blades. That order is what makes the smoothie blend smoothly instead of clumping. And the blending itself — 10 seconds on low, then 45 to 50 seconds on high — is what gets it completely smooth.
It’s a smoothie that works as a post workout drink, a quick breakfast, or an afternoon snack. It’s cold, creamy, and sweet enough to feel like a treat, and it’s the kind of thing that makes the recovery part of a workout feel less like a chore.
Why This Recipe Works
Post workout smoothies go wrong in three specific ways: a chalky texture, a smoothie that’s too thick or too thin, and a smoothie that separates before you finish drinking it. Here’s how this version solves each one.
1. Layer the Ingredients in the Right Order
Almond milk goes in first so the blades can spin freely. Then the banana and creatine, then the frozen berries on top. The berries’ weight presses everything down into the blades, and the creatine is sandwiched between the soft banana and the frozen berries so it doesn’t clump on the sides or settle at the bottom. The order is what makes the smoothie blend smoothly instead of turning into a chalky mess.
2. Start on Low, Then Go High
Starting the blender on low for 10 seconds breaks up the frozen berries without overworking the motor. Then 45 to 50 seconds on high gets the smoothie completely smooth and creamy. Starting on high immediately can cause the ingredients to shoot up the sides and leave chunks at the bottom.
3. Serve Immediately
A smoothie with creatine in it is best served right after blending. The creatine stays suspended in the liquid for a while, but it can settle at the bottom if the smoothie sits for too long. Serve it immediately and drink it fresh — that’s when it tastes best and the texture is right.
Ingredients That Matter
Unsweetened almond milk. 1 cup. The base of the smoothie. Unsweetened is important — the banana and berries are already sweet, and sweetened almond milk would make the smoothie too sweet. Any milk works, but almond milk is the lightest option.
One medium banana. Fresh or frozen. A room-temperature banana blends faster and gives the smoothie a softer texture; a frozen banana makes the smoothie thicker and colder. Either works, and both are good.
One packet of creatine. About 3 to 5 grams. This is optional — the smoothie works without it — but it’s what makes it a post workout smoothie instead of just a smoothie. Stir it into the banana layer so it doesn’t clump.
Frozen mixed berries. 1 cup. The berries are what make the smoothie cold and thick, and they add the tartness that balances the sweetness of the banana. Frozen is important — fresh berries would make the smoothie thin and warm.
How to Make a Post Workout Smoothie
(See the recipe card below — the steps are identical and the card is the single source of truth.)
Tips and Troubleshooting
The smoothie is too thick. Add a splash more almond milk, 1 tablespoon at a time, and blend again.
The smoothie is too thin. Add a few more frozen berries and blend again, or use a frozen banana instead of a fresh one.
The smoothie is chalky or gritty. The creatine was added on top of the berries instead of between the banana and the berries, or it wasn’t blended long enough. Layer it between the banana and berries, and blend the full 45 to 50 seconds on high.
The smoothie has chunks of frozen berries. The blender wasn’t started on low, or it wasn’t blended long enough. Start on low for 10 seconds, then go high for 45 to 50 seconds.
The smoothie separated before I finished drinking it. It sat too long. Serve it immediately — a smoothie with creatine in it is best fresh.
The smoothie is too sweet. The banana was very ripe, or the almond milk was sweetened. Use unsweetened almond milk and a banana that’s ripe but not overripe.
The smoothie tastes bland. The berries were a mild variety, or the banana wasn’t ripe enough. Use a ripe banana and a mix of berries that includes something tart, like raspberries or blackberries.
The smoothie is too tart. The berries were very sour, or there were too many. Add a few more banana chunks or a teaspoon of honey.
Substitutions and Swaps
Unsweetened almond milk → oat milk, soy milk, or dairy milk. Same quantity. Oat milk is the creamiest; soy milk has the most protein; dairy milk is the most traditional.
Banana → frozen mango or frozen peach. Same quantity. The smoothie will be slightly sweeter and less creamy, but it works.
Frozen mixed berries → frozen strawberries, blueberries, or raspberries. Same quantity. A mix of berries gives the most complex flavor.
Creatine → skip it. The smoothie works without it — it’s just a berry banana smoothie. The creatine is what makes it a post workout smoothie, but it’s not required for the recipe to work.
For a protein smoothie version: add a scoop of vanilla protein powder to the blender with the banana and creatine. This makes the smoothie higher in protein without changing the flavor much.
For a green smoothie version: add a handful of fresh spinach to the blender with the banana. The color changes, but the flavor is barely noticeable.
Storage and Reheat
Serve immediately. The smoothie is best fresh — the creatine stays suspended, the texture is right, and the flavor is at its best.
Refrigerate leftovers in a sealed jar for up to 24 hours. The smoothie will separate and the texture will change, so stir or shake it before drinking.
Freezing is not recommended — the texture gets icy and the smoothie loses its creamy consistency.
Food safety: store leftovers within 2 hours of making. Discard anything left at room temperature longer than 2 hours.
Notes
The layering order is what makes the smoothie blend smoothly — almond milk first, banana and creatine second, frozen berries last.
Starting on low and finishing on high is what gets the smoothie completely smooth without chunks. Serve it immediately — the creatine stays suspended for a while, but it can settle if the smoothie sits too long.
The creatine is optional; the smoothie works without it. Nutrition is an estimate and varies by almond milk and berry brands.
Did you make this recipe? Leave a comment on the blog or share a photo on Pinterest.
Frequently Asked Questions
Do I have to use creatine?
No — the smoothie works without it. It’s what makes it a post workout smoothie, but the flavor and texture are the same either way.
Can I use a frozen banana?
Yes. A frozen banana makes the smoothie thicker and colder. A room-temperature banana blends faster and gives a softer texture. Both work.
Can I use a different milk?
Yes. Oat milk, soy milk, and dairy milk all work. Oat milk is the creamiest; soy milk has the most protein.
Can I use fresh berries instead of frozen?
You can, but the smoothie will be thinner and less cold. Frozen berries are what give the smoothie its thick, cold texture.
Why did my smoothie turn out chalky?
The creatine was added on top of the berries instead of between the banana and the berries, or it wasn’t blended long enough. Layer it between the banana and berries and blend the full 45 to 50 seconds on high.
Can I make this ahead of time?
You can refrigerate it for up to 24 hours, but the texture changes and it separates. It’s best served fresh.
Can I add protein powder?
Yes. Add a scoop of vanilla protein powder to the blender with the banana and creatine. It makes the smoothie higher in protein without changing the flavor much.
What’s the best way to blend a smoothie?
Liquid first, soft ingredients second, frozen ingredients last. Start on low for 10 seconds, then go high for 45 to 50 seconds. That order and that timing are what get a smooth, creamy smoothie.
More Post-Workout and Healthy Recipes You’ll Love
Turkey Meatballs — juicy baked mini meatballs for meal prep and freezer storage.
Tofu Marinade — honey soy marinade for meal prep tofu.
Teriyaki Ground Chicken Bowls — 20-minute meal prep bowls.
Closing
I’ve been making this post workout smoothie for years, and the thing that changed everything for me was the layering order. The first version I made was chalky and had frozen berry chunks at the bottom — the liquid-first, frozen-last order and the 10-seconds-low-then-high blend fixed that completely. Now it’s the smoothie I make after every workout, and it’s the one I keep coming back to.
If you make the protein powder version or use a different milk, let me know how it turns out in the comments.